Settings
Dialog 4220 Lite/Dialog 4222 Office74
Program a new melody, edit or delete a current melody
Ô Program Press.
Press the key for the requested type of call:
If there is a current melody, the melody is played and the last 19
notes or signs are displayed.
Ô Line 1 Press for internal calls,
or
Ô Line 2 press for external calls,
or
Ô Inquiry press for Callback calls.
To edit the current melody:
ì Press to move the cursor to the right of the position to be
edited.
Keep pressed to go to the beginning or to the end.
í Press to erase the note to the left of the cursor.
Keep pressed to erase all the notes.
To enter a new melody or notes, see section “To en t e r no t e s” on
page 76.
To store the current melody:
ÖÔ Line Press the flashing Line key (Line 1 or Line 2 or Inquiry).
ÕÔ Program Press.
The current melody is stored.
Note: The melody is not yet activated, see section “Activate
or deactivate a stored melody” on page 75.
To Next Page
Loading...
