Description
Green key: this is used when the set is idle or in communication,
to call back the last number dialled (LNR function).
Red key: this is used
- during a communication, to end the call,
- during programming, to cancel a setting or end a programming
sequence.
Directory key: not available in attendant mode.
Programming key: this is used to access the settings (rings and
contrast).
Loudspeaker key: this is used to enable and disable the loudspeaker
mode.
The associated lamp lights up to remind you that the feature has been
enabled.
Mute key: during a call, this key lets you cut off the microphone
(handset, hands free or micro-headset) and talk without your
correspondent being able to hear you.
The associated lamp lights up to remind you that the feature has been
enabled.
R Key (Flashing): during a call, this key is used to access dialling
(e.g. to call a second correspondent).
Depending on the features available through your system operator.
Navigator: this comprises four direction keys and one central key.
- The and keys are used to display a selection or a record.
- The and keys are used to carry out a setting.
- The key is used to confirm a choice or a setting.
Alphabetic keypad: this is used
- to make a call using the name of a correspondent and search for a
correspondent in the internal and external directories,
- to enter text when notifying a correspondent.
Open the cover to reveal the keypad.
To Next Page
Loading...
