24
Using the attendant console
24
Suppose you want the number of the called or calling corres-
pondent (internal or external) to be registered in the log, to
identify a nuisance call, for example.
1 - Press the --
>
interactive key.
2 - Press the Trace interactive key.
The number will automatically be stored in the log, which can
be consulted by the system operator.
Trace
-->
Using the trace
function:
- Press the red key.
If the set is in hands free mode, the lamp goes out.
The correspondent is released and the call ended.
Note: when the attendant console returns to idle mode following a
call, the display remains clear for a few seconds. However, the
attendant console continues to function normally and any
operations (such as answering a call) are registered.
Ending a call
You can save the distant correspondent's number to a
programmable key, whether the call is incoming or outgoing.
1 - Press (successively) the --
>
interactive key.
2 - Press the Memory interactive key.
3 - Press a programmable key.
The number will automatically be stored, and can be dialled
by pressing the programmable key in question.
Note: Write the correspondent's name on the label beside the
programmable key.
Memory
-->
Storing a
correspondent’s
number:
M. DUPONT
To Next Page
Loading...
