Dialling methods
13
Comm
Int. Name
Next
Call
1 - Press the Comm interactive key.
2 - Press the Int. Name interactive key (or press the --
>
interactive key and then press the Ext. Name interactive key).
3 - Enter the first letters of the correspondent's name via the
alphabetical keypad.
. If you need to correct what you enter, press the Erase
interactive key.
4 - Press the Consult interactive key.
. If you're not sure how the name is spelt, press the Phonet*
interactive key.
The display suggests a name or shows the number of possibilities.
. Press the Next interactive key as many times as necessary
until the desired name is displayed.
. Press the Previous interactive key to return back.
. If necessary, press the Correct interactive key to resume
entering letters.
5 - Press the Call interactive key to dial the correspondent
displayed.
The telephone set automatically dials the number.
When the correspondent answers, you can hold a conversation.
If you don't know the number of an internal or external correspondent, you can retrieve the
number by entering the correspondent's name via the alphabetic keypad.
Calling by name a correspondent listed in the internal or external
directories*
name xx
Consult
Phonet
Erase
* Depending on the features provided by your system operator
Correct
Previous
When in idle mode or during a call,
1- Press the interactive key.
2 - Enter an abbreviated number (3xxx).
The telephone will dial the number automatically.
When the correspondent answers, you can hold a conversation.
Calling an abbreviated number*
You can save time by using the collective abbreviated numbers. These numbers can be
programmed from the attendant console and are available to all subscribers (see Attendant set
services - Programming and managing the system).
3xxx
or
_xxx
To Next Page
Loading...
