Attendant console services
31
Programming a
wake-up call:
This feature is used to programme a wake up call for a given
room.
1 - Press the Wake-up interactive key.
The display asks you to enter the room’s extension number.
2- Enter the extension number.
. Press Erase to correct an error.
3- Press the Enter interactive key.
4- Press the Activ. interactive key.
5- Enter the required wake-up time
(HH MM, i.e. hours and minutes).
. Press the Erase interactive key to correct an error.
6- Press the Enter interactive key.
The display confirms the programmed wake-up time.
To change the wake-up time:
- press the Modify interactive key.
To cancel the wake-up call:
- press the Cancel interactive key.
To programme a wake-up call for another room:
- press the Next interactive key.
The extension will ring at the programmed time.
Note
: use the red key to end the sequence and return to idle
mode.
Wake-up
Enter
Activ.
Enter
HH MM
Modify
Cancel
Next
To Next Page
Loading...
