Aastra OpenCom 100 User Manual

Installation
47
Interface Cards
OpenCom 131 (1 Slot)
An interface card of type “M100-AT4” can be installed in the free large slot. With this
interface card it is possible to connect the OpenCom 131 to analogue trunk lines.
OpenCom 130 (3 Slots)
The following overview shows the available interface cards.
Ports: 4 x S
0
Interface card Slots Special features
1 2 3
M100-S4: 4 x S
0
X X S
0
are switchable internally/externally
M100-U4d: 4 x U
pn
X X U
pn
are DECT-enabled
M100-U8d: 8 x U
pn
X X U
pn
are DECT-enabled
M100-S2U6d:
2 x S
0
and 6 x U
pn
X X U
pn
are DECT-enabled
S
0
are switchable internally/externally
M100-S2A6:
2 x S
0
and 6 x a/b
X X S
0
are switchable internally/externally
M100-A4: 4 x a/b X X X
M100- A8: 8 x a/b X X X
M100-AT4 X 4 analogue trunk lines
M100-IP X X Voice over IP
S
0
1/1
----
Slot 1Slot 2Slot 3
S
0
1/2
S
0
1/3 S
0
1/4
S
0
2/1 S
0
2/2
S
0
2/3 S
0
2/4

Aastra OpenCom 100 Specifications

General

Brand	Aastra
Model	OpenCom 100
Category	Conference System
Language	English