Installation
61
Voice Mail
If you are using an external voice mail system, it must be capable of handling the
number of digits used for internal telephone numbers, e.g. five digits if you have con-
figured five-digit internal numbers. We recommend the following Speech Design
products: Memo 200 / 300 / 400 or Memo 200-A / 300-A / 400-A.
The external voice mail system can be connected to internal a/b ports as well as to
internal S
0
ports. For both port types the voice mail system can activate the notifi-
cation for system terminals with the code procedures
*68 resp. #68.
Intercom System (for a/b)
The intercom systems “DoorLine T01 / 02” and “DoorLine T03 / 04” of the Deutsche
Telekom can be connected via the “DoorLine M06” to any a/b port. The “DoorLine”
module provides the actor for the door opener contact.
Observe the following when connecting:
• The intercom system and the “DoorLine” module should be set to their factory set-
tings.
• In the Telephony: Ports: a/b: Change menu in the Configurator, select Door-
station 2-wire under Type. Deactivate the Actuator option, if you want to use the
actor port of the OpenCom 100 instead of the “DoorLine” relay. The “DoorLine”
actor can be operated only when the speech channel is open at the same time.
The internal actor can be operated at any time.
• The “DoorLine” intercom system has a number of bell keys to which you can assign
different call numbers in the Telephony: Ports: Doorbell menu in the Configu-
rator.
• You can call the “DoorLine” intercom system by entering the code procedure
*102.
• The “DoorLine” intercom system can be connected to any a/b port. However, you
can use only one “DoorLine” with the OpenCom 100.
For details on installing and configuring the “DoorLine” intercom system, refer to the
product user guide.
The intercom system should be installed by qualified personnel only as sensor/actor
contacts will need to be connected to the “DoorLine” module.
To Next Page
Loading...
Need help?
General
