20 266HSH MODBUS TRANSMITTER | PRESSURE/TEMPERATURE MULTIVARIABLE | OI/266HSHMT-EN REV. A
7.10 Activation procedure for LCDs
functions.
until two icons will appear at the bottom corners of
under the right icon within
to access the instantaneous diagnostic
messages.
Press then for 2 s. the right button or external S
pushbutton to access the menu or press the left button or
diagnostic messages. Without action on buttons
associated to bottom icons after few seconds the
in the corners.
7.12 HMI menu structure
versions. Once accessed the menu should be completed
instructions on the screen and consider that for alfa/
7.8 Configuration of the pressure transmitter
using the optional LCD HMI with keypad (menu-
controlled)
Important. After 30 seconds without action on on-board buttons or
external Z/S pushbuttons, the Standard HART transmitter
automatically exit the configuration menu.
menu is divided in the following sections which can be
.
Follow the instruction on the screen to perform the
configuration of the different parameters.
This menu allows the verification and the
pressure transmitter. The menu driven structure will guide
of the entire device The menu driven structure includes the
menu allows user to reset all the parameters to the default
configuration.
number available.
7.10
7.11
To Next Page
Loading...
