7266HSH MODBUS TRANSMITTER | PRESSURE/TEMPERATURE MULTIVARIABLE | OI/266HSHMT-EN REV. A
Figure 2: Product identification
ABB S.p.A.
Tremezzina (Co) Italy
0722
N30067
If cable entry point has
temperature of > 60°C
II 1 G Ex ia IIC T6....T4 Ga - II 1/2 G Ex ia IIC T6 Ga/Gb
II 1 D Ex ia IIIC T85°C Da for electrical parameters
see DH3173 - "FISCO Field Instrument"
FM09ATEX0024X and IECEx FME16.0003X
II 3 G Ex ic IIC T6....T4 Gc - II 3 D Ex tc IIIC T85°C Dc
for electrical parameters see DH3173
"FISCO Field Instrument"
FM09ATEX0025X IECEx FME16.0004X
General Purpose IP67 Max.Supply Voltage 42 Vdc
XP (US) CL I/DIV1/GP ABCD, DIP CL II, III /DIV 1/GP EFG,
XP (Canada) CL I/DIV 1/GP BCD, DIP CL II, III /DIV 1/GP EFG,
CL I, ZONE 1, AEx/Ex d IIC T4 Gb -50°C<Ta<+85°C
ENCL 4X T AMB=85°C "Seal not required"
FM
II 1/2 G Ex db IIC T6 Ga/Gb - II 1/2 D Ex tb IIIC T85°C
FM09ATEX00023X - IECEx FME16.0002X (-50°C < Ta < +75°C)
Power Supply 42 Vdc / 2W Max
CL I, ZONE 2 AEx nC IIC T6...T4 Ex nL IIC T6...T4 Gc
CL I/DIV 2/GP ABCD /T6...T4 NIFW when connected per drawing
DH 3173 ENCL 4X "FISCO Field Instrument"
FM
APPROVED
FM
USC
APPROVED
USC
APPROVED
USC
IS/Sec. Intrinseque (Entity) CL I, ZONE 0 AEx/Ex ia IIC T6.....T4 Ga
CL I/DIV 1/GP ABCD IS - CL II/DIV 1/GP EFG - CLIII when
conn. per dwg DH 3173 ENCL 4X "FISCO Field Instrument"
FM16CA0036X - FM16US0066X
A
B
C
2600T
Tag
Number
Calib.
Range
PRESSURE TRANSMITTER
* C and F sensors on gauge and absolute pressure transmitters are in compliance with IEC61000-4-6 with B criteria
4.2
The 266 transmitter can be supplied with the optional
“Wired On Stainless Steel plate” (figure 3) which is
permanently laser printed with a custom text specified in
phase of order. The available space consists in 4 lines with
32 characters per line.
The plate will be connected to the transmitter with a
Stainless Steel wire.
4.3
The instrument does not require any special precautions
during handling although normal good practice should be
observed.
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
Figure 3: 4-line layout of the optional wired-on Stainless Steel plate
4.4 Storage
The instrument does not require any special treatment if
stored as dispatched and within the specified ambient
conditions. There is no limit to the storage period,
although the terms of guarantee remain as agreed with
the Company and as given in the order acknowledgement.
To Next Page
Loading...
