ABB 266HSH - 7 Operation (continued); Communication Settings and Signal Damping

33266HSH MODBUS TRANSMITTER | PRESSURE/TEMPERATURE MULTIVARIABLE | OI/266HSHMT-EN REV. A
Communication
Exit Select
Menu
9
Protocol Settings
Protocol
HART Address
Back Select
1
Software
Back
1
Communication
Communication
Protocol Settings
Protocol Settings
Protocol
HART Address
Back Select
1
Back
1
Communication
Operate/Modbus
Back Select
1
Communication
Communication
Protocol
Protocol Settings
Protocol
HART Address
Back Select
1
0
Back Edit
1
Communication
Communication
HART Address
Min 0
Max 15
Next OK
HART Address

- Protocol Settings
- Protocol
- HART Address
7.11 Damping (DAMPING)



The additional time constant can be set between 0 s and
60 s in increments of 0.0001 s. Damping does not affect








> Damping.
Set the damping to the desired value.



See relevant operating instruction
7.13