29.5 Motor Application Package
Motor Application Package can be selected with order code Digit
8, and it can be selected for 5,10,15 or 20 feeders. The size of the
package impacts the number of available function instances. The
content of the package is described in the table below.
Table 125. Protection
Function Name IEC 61850 Name
Number of Instances
5 Feeders 10 Feeders 15 Feeders 20 Feeders
Negative-sequence overcurrent protection
for motors
MNSPTOC 10 20 30 40
Loss of load supervision LOFLPTUC 5 10 15 20
Motor load jam protection JAMPTOC 5 10 15 20
Motor start-up supervision STTPMSU 5 10 15 20
Phase reversal protection PREVPTOC 5 10 15 20
Thermal overload protection for motors MPTTR 5 10 15 20
29.6 Special Application Package
Special optional applications can be selected with order code
Digits 14 and 15. The content of the package is described in the
table below.
Table 126. Special AppPack
Function Name IEC 61850 Name Number of Instances
Arc ash protection
(Multi-bay)
ARCSARC 60
Load shedding and restoration across 4
bus sections
(Multi-bay)
LSHDPFRQ 20
Tap changer control with voltage regulator
(Single-bay Volt-reg)
OLATCC -
Petersen coil passive controller
(Single-bay PCC)
PASANCR 1
Current total demand and harmonic distor-
tion (TDD and THD)
(Single-bay PQI)
CH00MHAI 20
Voltage total harmonic distortion (THD)
(Single-bay PQU)
VH00MHAI 4
Voltage variation
(Single-bay PQU)
PHQVVR 4
Voltage unbalance
(Single-bay PQU)
VSQVUB 4
To Next Page
Loading...
