Section 9 Technical Data CP-C 24/5.0
M&I – AC 900F Controller 141
CP-C 24/5.0
Application
L and N inputs
L+ and L- outputs
Status indicators
CP-C 24/5.0 Switch-mode power supply unit
Rated voltage 110 - 240 V AC
AC voltage range 85 - 264 V AC
Rated current 1.3 - 0.6 A
DC voltage range 100 - 350 V DC (external fuse)
Frequency range 47 - 63 Hz
Power consumption typ. 135 W
Efficiency factor max. 88%
Hold-up time > 100 ms
Internal fuse (equipment protection) 4 A, delayed-action
Inrush current < 23 A
l
2
t at cold start 0.9 A
2
s
Parallel connection max. 5 devices, no symmetrical current
Protection against transient overvoltage Varistors
Reactive power compensation (PFC) Ye s
Rated voltage 24 V DC +/- 0.5%
Output voltage adjustment range 22 - 28 V
Rated current at Ta < 60 °C 5 A
Current derating at 60 °C < Ta ≤ 70 °C - 2.5% per K temperature increase
Peak current (power reserve) < 7.25 A at Ta < 40 °C
Rated power 120 W
Power dissipation < 15 W
Short-circuit current limiting 11 A
Starting of capacitive loads Unlimited
Resistance to Short-circuit, no load and overload
OUTPUT OK, green LED Output voltage OK
To Next Page
Loading...
