TK 831F CAN cable Section 4 Accessories
68 M&I – AC 900F Controller
TK 831F CAN cable
CAN TK 831F_us.png
Features
• Shielded twisted-pair cable
• Two connectors, D-SUB 9-pin male (M) and D-SUB 25-pin female (F)
• Cable length 0.5 m
Use
The TK 831F cable connects the CI 910F CAN module to the TB 870F terminal
block. The cable is provided with a feed line and a return line for each signal in
order to avoid using spurs. For example, the pins 1 and 14 of the 25-pin connector
are electrically connected to pin 2 of the 9-pin connector via one wire, each.
Connector pin assignment
When replacing the CI 910F module or the controller, disconnect the 9-pin
connector only. Disconnecting the 25-pin connector will interrupt the CAN bus.
Channel Signal Pins D-SUB 25 Pins D-SUB 9
1 CAN 1H
CAN 1L
1, 14
2, 15
2
3
2 CAN 2H
CAN 2L
4, 17
5, 18
6
7
3 CAN 3H
CAN 3L
7, 20
8, 21
8
4
To Next Page
Loading...
