Dimensional drawing of the CP-A RU Section 5 Mounting
82 M&I – AC 900F Controller
Dimensional drawing of the CP-A RU
CP_A_RU_dimensional_drawing.png
Install the devices in upright position with the input terminals being arranged at the
bottom. In order to ensure sufficient convection cooling, the minimum distance to
other modules must not be less than (A) 10 mm in horizontal direction and (B)
50 mm in vertical direction.
Dimensional drawings of the CP-C MM and CP-A CM
CP-C MM_CP-A CM.png
The CP-C MM and CP-A CM modules have identical dimensions.
To Next Page
Loading...
