Diagnostic cables TK 890F and TK 891F Section 4 Accessories
64 M&I – AC 900F Controller
Use
Unused C1 and C2 coupler bus slots must be covered by dummy couplers. This is of
essential importance in order to comply with the ISA 74.01 G3 requirements.
Diagnostic cables TK 890F and TK 891F
• PC side: D-SUB, 9-pin, female connector
• AC 900F side: D-SUB, 9-pin, male connector
The diagnostic cable is available in two different lengths:
• TK 890F with 10 m length
• TK 891F with 5 m length
Use
The TK 890F or TK 891F cable connects the AC 900F to the 9-pin port of the PC
provided for diagnostic purposes. For interfaces with a 25-pin connector, a
commercial adapter is additionally required. The energized diagnostic PC can be
connected to the running AC 900F.
TA525 inscription labels
TA525_us.png
To Next Page
Loading...
