32 Mechanical installation – Frames R1 to R3
3. Attach chains to the drive lifting holes and lift the drive with a lifting device onto
the opening in the mounting plate.
4. Attach the bottom bracket with one screw.
5. Attach the top bracket with one screw.
6. Attach the rest of the mounting screws. Remove the chains.
10
11
12 13
1 × M6×25 screw
6 N·m
1 × M6×25 screw
6 N·m
R1: 8 × M6×25 screw
R2: 10 × M6×25 screw
R3: 12 × M6×25 screw
6 N·m
To Next Page
Loading...
