Mechanical installation – Frames R4 and R5 45
12. Attach the chains to the lifting holes of the flange and lift the drive with a lifting
device onto the opening in the mounting plate.
13. Attach the bottom bracket with one screw.
14. Attach the top bracket with one screw.
15. Attach the rest of the mounting screws. Remove the chains.
14 x M6x25 screw
6 N·m
10 11
12 13
1 x M6x25 screw
6 N·m
1 x M6x25 screw
6 N·m
To Next Page
Loading...
