54 Mechanical installation – Frames R6 to R9
5. Attach the chains to the lifting holes of the flange and lift the drive with a lifting
device onto the opening in the mounting plate.
6. Attach the bottom bracket with one screw.
7. Attach the top bracket with one screw.
8. Attach the rest of the mounting screws. Remove the chains.
R6…R8:
14 × M6×25
6 N·m
R9:
16 × M6×25
6 N·m
1 × M6×25
6 N·m
1 × M6×25
6 N·m
To Next Page
Loading...
