ABB ACS355 - Creating a Visualization for a Copied Drive Program

Customization 19
1. Open the Resources tab.
2. Select Global_Variables.
3. See declaration of LineCom1 of type ACS_MOD_TOKEN_TYPE.
 Creating a visualization for a copied drive program
You can copy the visual elements of a drive for another drive to enable monitoring each
drive through the visualization.
1. Open the Visualization tab and double-click the PLC_VISU element to open the
visualization.
2. Copy-paste the elements of the first drive (ie, right-click and Copy, then right-click and
Paste each of them).
3. Arrange the copied elements, for example, next to the original ones.
4. Double-click a copied element.
5. With Category: Visualization selected, click Placeholder….
The Replace placeholders window opens.
6. In the Replacement tab, change the name, eg PRG Drive2 FB BASIC CONTROL.
7. Click OK and OK to accept the changes.
8. Repeat the previous steps for other copied elements.
1
2
3
6
5
4
7