About the manual
What this chapter contains
The chapter describes the contents of the manual. It also contains information on the
compatibility, safety and intended reader.
Starter kit overview
The ACS355 and AC500-eCo starter kit is designed for controlling up to seven ACS355
drives connected through a Modbus link. The maximum total length of the Modbus link is
50 meters (160 feet).
Compatibility
This manual is intended to be used with the ACS355 and AC500-eCo starter kit.
Safety instructions
Follow all safety instructions delivered with the starter kit:
• Read the complete safety instructions for the ACS355 drive before you install,
commission or use the drive. The complete safety instructions are given at the
beginning of the ACS355 user’s manual (3AUA0000066143 [English]).
• Read all safety instructions of the AC500-eCo PLC. See System description AC500
(2CDC125015M0201 [English]) or the online help in CoDeSys (Help > Contents >
Target System > AC500 / S500 > Introduction > Overview > Regulations).
Reader
The manual is intended for people responsible for configuring and using the starter kit.
To Next Page
Loading...
