206 ACS510 User’s Manual
Diagnostics
5042 Selected parameter set can’t be found in the current parameter backup.
5043 No start inhibit was granted.
5044 Parameter backup versions do not match.
5050 Parameter upload was aborted.
5051 File error was detected.
5052 Parameter upload attempt has failed.
5060 Parameter download was aborted.
5062 Parameter download attempt has failed.
5070 Panel backup memory write error was detected.
5071 Panel backup memory read error was detected.
5080 Operation is not allowed, because the drive is not in local mode.
5081 Operation is not allowed, because a fault is active.
5082 Operation is not allowed, because override mode is enabled.
5083 Operation is not allowed, because parameter lock is not open.
5084 Operation is not allowed, because drive is busy, try again.
5085 Download is not allowed, because drive types are incompatible.
5086 Download is not allowed, because drive models are incompatible.
5087 Download is not allowed, because parameter sets do not match.
5088 Operation failed, because a drive memory error was detected.
5089 Download failed, because a CRC error was detected.
5090 Download failed, because a data processing error was detected.
5091 Operation failed, because a parameter error was detected.
5092 Download failed, because parameter sets do not match.
Code Description
Supplied from China by: Guangzhou Tofee Electro Mechanical Equipment Co., Ltd
Email: info@tofee.com.cn
To Next Page
Loading...
