ACS51
0
User’s Manual 7
Installation
Installation
Study these installation instructions carefully before proceeding. Failure to observe
the warnings and instructions may cause a malfunction or personal hazard.
Warning! Before you begin read "Safety" on page 3.
Installation Flow Chart
The installation of the ACS510 adjustable speed AC drive follows the outline below.
The steps must be carried out in the order shown. At the right of each step are
references to the detailed information needed for the correct installation of the drive.
Task See
PREPARE for installation "Preparing for Installation" on page 8.
PREPARE the Mounting Location "Prepare the Mounting Location" on page 11.
REMOVE the front cover "Remove Front Cover" on page 11.
MOUNT the drive "Mount the Drive" on page 12.
INSTALL wiring "Wiring Overview" on page 13 and
"Install the Wiring" on page 18.
CHECK installation "Check Installation" on page 24.
RE-INSTALL the cover "Re-install Cover" on page 25.
APPLY power "Apply Power" on page 26.
START-UP "Start-Up" on page 26.
Supplied from China by: Guangzhou Tofee Electro Mechanical Equipment Co., Ltd
Email: info@tofee.com.cn
To Next Page
Loading...
