ACS510 User’s Manual 237
Technical Data
CE Marking
When a CE mark is attached to the ACS510 AC drive, it verifies that the drive follows
the provisions of the European Low Voltage and EMC Directives (Directive
73/23/EEC, as amended by 93/68/EEC and Directive 89/336/EEC, as amended by
93/68/EEC). The corresponding declarations are available on request and can be
found using the internet at: http://www.abb.com.
The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used in European Economic Area. The EMC product standard
EN 61800-3 covers the requirements stated for drives, such as the ACS510. The
drive complies with the First environment (restricted distribution) and Second
Environment limits of EN/IEC 61800-3.
Electromagnetic Environments
Product standard EN 61800-3 (Adjustable speed electrical power drive systems -
Part 3: EMC product standard including specific test methods) defines First
Environment as environment that includes domestic premises. It also includes
establishments directly connected without intermediate transformers to a low voltage
power supply network which supplies buildings used for domestic purposes.
Second Environment includes establishments other than those directly connected
to a low voltage power supply network which supplies buildings used for domestic
purposes.
Liability Limits
The manufacturer is not responsible for:
• Any costs resulting from a failure if the installation, commissioning, repair,
alteration, or ambient conditions of the drive do not fulfil the requirements
specified in the documentation delivered with the unit and other relevant
documentation.
• Units subjected to misuse, negligence or accident.
• Units comprised of materials provided or designs stipulated by the purchaser.
In no event shall the manufacturer, its suppliers or subcontractors be liable for
special, indirect, incidental or consequential damages, losses or penalties.
If you have any questions concerning your ABB drive, please contact the local
distributor or ABB office. The technical data, information and specifications are valid
at the time of printing. The manufacturer reserves the right to modifications without
prior notice.
Supplied from China by: Guangzhou Tofee Electro Mechanical Equipment Co., Ltd
Email: info@tofee.com.cn
To Next Page
Loading...
