Control Panel.
as appropriate.
drive. To reach the Output mode, press EXIT until the LCD display shows status
LCD Display – Divided into three main areas:
• Top line – variable, depending on the mode of operation. For example,
see "Status Information" on page 30.
• Middle area – variable, in general, shows parameter values, menus or
lists.
• Bottom line – shows current function of the two soft keys.
Up –
• Scrolls up through a menu or list
displayed in the middle of the LCD
Display.
• Increments a value if a parameter
is selected.
• Increments the reference if the
upper-right corner is highlighted (in
reverse video).
Soft key 1 – Function varies, and is
defined by the text in the lower-left
corner of the LCD display.
Soft key 2 – Function varies, and is
defined by the text in the lower-right
corner of the LCD display.
Down –
• Scrolls down through a menu or list
displayed in the middle of the LCD
Display.
• Decrements a value if a parameter
is selected.
• Decrements the reference if the
upper-right corner is highlighted (in
reverse video).
Help – Displays context sensitive
information when the button is
pressed. The information displayed
describes the item currently
highlighted in the middle area of the
display.
START – Starts the drive in
local control.
LOC/REM – Changes between local
and remote control of the drive.
Status LED – Green for normal
operation. If LED is flashing, or red,
see Diagnostics.
STOP – Stops the drive in
local control.