74 ACS550 User’s Manual
Start-Up
11 = TIMER FUNCTION 1. – Assigns Start/Stop control to Timer Function 1 (Timer Function activated = START; Timer
Function de-activated =
STOP). See Group 36, Timer Functions.
12…14 =
TIMER FUNCTION 2… 4 – Assigns Start/Stop control to Timer Function 2…4. See Timer Function 1 above.
1002 EXT2 COMMANDS
Defines external control location 2 (
EXT2) – the configuration of start, stop and direction commands.
• See parameter 1001
EXT1 COMMANDS above.
1003 DIRECTION
Defines the control of motor rotation direction.
1 =
FORWARD – Rotation is fixed in the forward direction.
2 =
REVERSE – Rotation is fixed in the reverse direction.
3 =
REQUEST – Rotation direction can be changed on command.
Code Description
To Next Page
Loading...
