10
Digital instruments
Reset min and max values
- Select the number 5 to reset the values, which is
subsequently confirmed by the displaying three
points
Changing the full scale setting automatically enables the resetting of the
minimum and maximum values, and when you exit from programming
mode
will be displayed during the time it takes to recalculate the
values.
Minimum alarm threshold [V]
-
= alarm function disabled
- 10 ÷ 590 V full scale values available, resolution 10
V
Maximum alarm threshold [V]
-
= alarm function disabled
- 10 ÷ 590 V full scale values available, resolution 10 V
When you select tHH or tHL:
1. the first digit on the right starts flashing
2. press repeatedly to select the required value
3. press and hold the button at least >3sec to confirm
The max selectable value of tHH is always lower than the full scale
value formerly selected.
VLMD-R P
1. Settings
EN
To Next Page
Loading...
