ABB AP100 Series - 1 Introduction; Purpose; Cartridges and Cartridge Systems

2
1 INTRODUCTION
1.1 Purpose – Figs. 1.1 and 1.2
This instruction manual describes the installation and
maintenance of the AP100 Series Industrial pH and Redox
(ORP) Electrode Cartridge Systems.
A – Electrode In-line System
C – Offset Ported Flowcell System
1.2 Cartridges and Cartridge Systems
Fig. 1.1 shows schematic layouts for in-line and dip systems.
Fig. 1.2 shows unit dimensions and identifies cartridge system
installations.
epyTegdirtraC
101PAdehcatedelbaC,tenoyaB
201PAdehcattaelbaC,tenoyaB
301PAdehcatedelbac,ni-wercS
401PAelbisrembuS
sepyTrosneS
1/X01PA001ot0,ssalgdradnatS ° Hp41ot0,C
2/X01PA001ot0,ssalgdradnatS ° hsaWretaWsulpHp41ot0,C
3/X01PA07ot0,ssalgecnatsiserwoL ° Hp11ot0,C
4/X01PA07ot0,ssalgecnatsiserwoL ° hsaWretaWsulpHp11ot0,C
5/X01PA)PRO(xodeR
6/X01PAhsaWretaWsulp)PRO(xodeR
Fig. 1.1 System Schematics
Support Chain
Mains in
Current Output
Relays
Relays
Current Output
Mains in
Mains in
Current Output
Relays
Mains in
Current Output
Relays
Relays
Current Output
Mains in
Tube not supplied.
Water
Wash
from
Solenoid
Valve
D – Submersible System E – Typical Water Wash System
B – Electrode Dip System