4.7 Comem L340
• Insert the arm with float through the machined
hole on the conservator. Place the o-ring on the
slot behind the gauge. Insert the device on the
threaded pin of the conservator flange (Fig.
L340/A). The oil level indicator has to be mounted
using the items (Fig.L340/B) showed in the table
L340.
4.8 Comem eViewer
Arrange the transformer with a dedicated place
following the scheme in the figure 15. The
connection can be done in two alternative way:
• threaded pin and nut M6
• screws M6
16
LIQUID LEVEL INDICATOR - INSTRUCTION MANUAL
—
4. Installation
Figure L340
Q.ty Description Reference standard
-
Table L 3 40
Figure 20
To Next Page
Loading...
