ABB ControlMaster CM50 - CM10 Operator Page, Icons and Keys

ABB I Measurement Products - ControlMaster 7
Product Selection Guide
CM10 CM15 CM30 CM50
General
Size 1/8 DIN 1/8 DIN (Horizontal) ¼ DIN 3 x 6 DIN
(48 x 96mm) (96 x 48mm) (96 x 96mm) (76 x 144mm)
Display 5.6cm (2.2in) 5.6cm (2.2in) 8.9cm (3.5in) 8.9cm (3.5in)
Color TFT Color TFT Color TFT Color TFT
Dust/Water Protection IP66 & NEMA 4X IP66 & NEMA 4X IP66 & NEMA 4X IP66 & NEMA 4X
Supply Voltage 85-265V a.c. std 85-265V a.c. std 85-265V a.c. std 85-265V a.c. std
(24V d.c. opt.) (24V d.c. opt.) (24V d.c. opt.) (24V d.c. opt.)
Control Capabilities
PID (analog/time proportioning) ✔ ✔ ✔
Motorized Valve ✔ ✔ ✔
Split Output (Heat Cool) ✔ ✔ ✔
Adaptive Control ● ●
pPI (predictive) ● ●
Gain Scheduling ● ● ●
Autotune ✔ ✔ ✔
Templates
Single Loop ✔ ✔ ✔
Single Loop with Feed Forward ● ●
Auto/Manual Station ● ● ●
Analog Backup Station ● ● ●
Manual Loader ● ● ●
Cascade ● ●
Cascade with Feed Forward ● ●
Ratio Controller ● ●
Ratio Station ● ●
Dual Loop ● ●
Indicator ● ✔ ● ●
Dual Indicator ● ● ● ●
Inputs
Universal (TC, RTD, Resistance, mA, Volt, mV & Frequency) 1 std. 1 std. 1 std. (1 opt.) 1 std. (1 opt.)
Process (TC, mA, Volts, mV & Digital) 1 std. 1 std. 1 std. (1 opt.) 1 std. (1 opt.)
Digital 2 opt. 2 opt. 6 opt. 2 std. (4 opt.)
Transmitter Power Supply 2 std. 2 std. 2 std. (2 opt.) 2 std. (2 opt.)
Outputs
Analog/Logic 1 std. 1 std. 1 std. 1 std.
Analog 1 opt. 1 opt. 1 opt. 1 opt.
Relay 1 std. (3 opt.) 1 std. (3 opt.) 1 std. (3 opt.) 2 std. (2 opt.)
Digital 2 opt. 2 opt. 6 opt. 2 std. (4 opt.)
Advanced Features
Math ● ● ● ●
Logic ● ● ● ●
Custom Linearizers ● ● ● ●
Delay Timers ● ● ● ●
Real-time Alarms ● ● ● ●
Totalization ✔ ● ●
Historical Trending ● ●
Communications
Ethernet ● ● ● ●
RS485 MODBUS ● ● ● ●
Standard ✔ Optional ●