Need help?Do you have a question about the ABB Advant Controller 80 and is the answer not in the manual?
General| Brand | ABB |
|---|---|
| Model | Advant Controller 80 |
| Category | Controller |
| Language | English |
Detailed safety warnings and precautions for electrical work on the AC 80 controller.
Describes the AC 80 controller functions and the manual's content by chapter.
Defines technical terms used in the manual and lists related documentation.
Details the physical construction, mounting, and removal of the AC 80 unit.
Illustrates the main circuit boards and provides a system architecture block diagram.
Explains the function of Bus Indicator, Special Purpose, and General Purpose LEDs.
Covers setting the AC 80 station address and the function of the INIT button.
A table detailing all connection types, their specifications, and cable requirements.
Information on voltage, current consumption, and terminal designations for power supply.
Wiring diagrams for connecting single and redundant power supplies.
Steps for powering up the AC 80 and interpreting power-on LED status indicators.
Explains electrical and optical ModuleBus types, and I/O station size limits.
Describes the DriveBus interface, its communication speed, and branching unit usage.
Details Panelbus and MultiVendor modes for the Panel/Printer connection on Ch2.
Instructions on how to connect the AC 80 to the AF 100 bus, including redundancy.
Describes connections for Special I/O devices, Fieldbus Adapters, and PC tools.
Divides AC 80 related software into CPU, NCB, and PC support components.
Describes CPU support (Loader, AdvaBuild) and NCB support (NCB Loader, DriveDebug).
Overview of programming the AC 80 and details on the PM825 base configuration element.
Setting up drives via Optical ModuleBus using PC and DB sections for ACS 600 drives.
Details the DRIDS and DRISTD DB elements for configuring ACS 600 Standard Drives.
Details the DRIDS and DRIENG DB elements for configuring ACS 600 MultiDrives.
Using DRB00 DB and ACSRX PC elements for controlling drives via DriveBus.
Describes how to set up DB elements for various S800 I/O modules.
Lists the available DB elements for S800 analogue and digital I/O modules.
Details user-adjustable terminal settings for S800 I/O database elements.
Configuration for Panelbus mode, including PANBUS, PANC, and MODR/MODW elements.
Setup for MultiVendor mode using MVICHAN DB elements for external devices.
Details AF 100 link communication and station addressing between AC 80 units.
Describes the setup and configuration of the Special I/O link with devices.
Details NCBI01 DB and IORX PC elements used for Special I/O link communication.
Covers essential settings for IORX and NCBI01 elements in the Special I/O link.
Methods for finding issues and general information on AC 80 LEDs and bus indicators.
Interpreting General Purpose LEDs for status codes and error code indications.
Using FCB for status checks and understanding PC element error pins (ERR/ERRC).
Instructions on how to use the DriveDebug tool for monitoring and diagnostics.
To Next Page
