To Next PageTo Next Page
Need help?Do you have a question about the ABB ControlMaster CM15 and is the answer not in the manual?
General| Power Supply | 100 to 240 V AC or 24 V AC/DC |
|---|---|
| Output Channels | Up to 3 |
| Operating Temperature | -10 to 55 °C |
| Housing Material | Plastic |
| Type | Controller |
| Input Range | Thermocouple, RTD |
| Output Range | 0-10 V, 0/4-20 mA |
| Outputs | Relay, Analog Output |
| Communication Protocol | Modbus RTU |
| Control | PID, ON/OFF control |
| Dimensions | 96 x 96 x 100 mm |
| Weight | 500 g |
Details electrical safety requirements and compliance standards for the equipment.
Outlines health and safety precautions for operating and maintaining the equipment.
Provides guidance on optimal placement and mounting location for the indicator.
Details the procedure for panel mounting the CM15 indicator using clamps.
Provides essential warnings and guidelines for making electrical connections to the controller.
Illustrates the electrical connections for the CM15 indicator, including standard and option boards.
Shows module locations and terminal connections for the CMF160 indicator.
Details the configuration of analog inputs for the CM15 indicator, including input types.
Explains the configuration of analog inputs for the CMF160 indicator, including input types.
