ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN Appendix A – Digital and Analog Sources
IM/CM/I–EN Rev. P 95
A.2 Analog Sources
T1 (2) Run State Totalizer run state
1 = Totalizer running
T1 (2) Wrap Pulse Totalizer wrap pulse
If Wrap Enable is set to On – active for 1
second when the predetermined
count is reached.
If set to Off – active when the
predetermined count has been
reached and remains active until the
totalizer is reset.
Source Name Description [Comment]
Source Name Description
Anlg IP 1 (2) (CM15)
Anlg IP 1 (4) (CMF160)
Analog input
Constant 1 (8) Math block constant
Linearizer 1 (2) Custom linearizer
Math Block 1 (8) Math block
To Next Page
Loading...
