To Next PageTo Next Page
Need help?Do you have a question about the ABB ControlMaster CMF160 and is the answer not in the manual?
General| Model | CMF160 |
|---|---|
| Type | Controller |
| Input Types | Analog, Digital |
| Control | PID |
| Power Supply | 24V DC |
| Display | LCD |
| Communication Protocols | Modbus RTU |
| Enclosure Rating | IP66 |
| Output Types | Analog, Relay |
| Operating Temperature | -10 to 60 °C |
| Output Current | 4-20 mA |
Safety requirements for electrical equipment for measurement, control, and laboratory use.
Points to note for safe and risk-free operation, installation, and maintenance.
Step-by-step instructions for mounting the CM15 and CMF160 indicators.
Important warnings and guidelines for making electrical connections to the controller.
Setup for password protection at Basic, Advanced, and Service levels.
Defines user access levels (Logout, Read Only, Basic, Advanced, Service) and their permissions.
Access to standard setup parameters for indication type and non-standard configurations.
Configuration of analog and digital inputs/outputs and relays.
Used to configure up to 8 independent process alarms with various types and actions.
Configuration of two 9-digit totalizers, including mode, source, count direction, and units.
Parameters for setting up math blocks, logic equations, and timer functions.
Viewing diagnostic data, messages, and recommended corrective actions.
Specifications for universal and non-universal process inputs, including types and ranges.
Specifications for retransmission outputs, relays, and digital I/O.
