ABB ControlMaster CMF160 - Basic Setup; Process Alarms

ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 5 Operator Level Menus
IM/CM/I–EN Rev. P 31
5.2 Diagnostic View
The Diagnostic View is selected from the Operator / View
Select menu. All currently active diagnostic alarm states are
displayed in the Diagnostic View.
5.3 Security Options
Passwords can be set to enable secure end-user access at
2 levels: Basic and Advanced. The Service level is
password-protected at the factory and reserved for factory
use only.
Passwords are set, changed or restored to their default
settings at the Device Setup / Security Setup parameter – see
page 36.
Fig. 5.2 ControlMaster Diagnostic View
Alarm
Icon
Diagnostic Description / Alarm Tag
High High Temp
PV1 Failed
High Temp
Note. When the indicator is powered-up for the first time
the Basic and Advanced levels can be accessed without
password protection. Protected access to these levels
must be allocated on-site as required.