ABB ControlMaster CM15 - 2 Introduction; EC Directive 89;336;EEC; End of Life Disposal

ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 2 Introduction
6 IM/CM/I–EN Rev. P
2Introduction
This manual provides details for the ControlMaster CM15 (
1
/8 DIN) and CMF160 fieldmount indicators.
2.1 EC Directive 89/336/EEC
In order to meet the requirements of the EC Directive 89/336/EEC for EMC regulations, this product must be used in an industrial
environment.
2.2 End of Life Disposal
Indicators with Standard functionality and above contain a small lithium battery that must be removed and disposed of
responsibly in accordance with local environmental regulations.
Indicators with Basic functionality do not contain any substance that causes undue harm to the environment and must be
disposed of in accordance with the Directive on Waste Electrical and Electronic Equipment (WEEE). They must not be disposed
of in Municipal Waste Collection.
Note.
 Read all relevant sections of this guide before configuring the system or modifying system parameters.
 Install and use associated equipment in accordance with the relevant national and local standards.
 System configuration must be carried out only by users or personnel with approved access rights (user privileges).