ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 5 Operator Level Menus
32 IM/CM/I–EN Rev. P
5.4 Access Level
Level Access
Logout Displayed after Basic or Advanced level
are accessed. Logs the user out of Basic
or Advanced level. If passwords are set, a
password must be entered to access
these levels again after selecting Logout.
Read Only Enables all parameter settings to be
viewed
Basic Setup Enables access to the Basic level and
adjustment of alarm trip points.
Advanced Enables configuration access to all
parameters.
Service Reserved for use by authorized service
personnel.
Table 5.1 Access Levels
Fig. 5.3 Access Level
Note. A 5-minute time-out period enables a user to return
to the Operator page and re-access the previous menu
(displayed at exit) without re-entering the password. For
periods over 5-minutes (or if Logout is selected), a
password must be re-entered to access protected levels.