14
…3 SET UP MODE
…3.2 Setup Level (Level 2)
•1 Not displayed if the alarm is disabled ('None' selected) – see Section 4.3.2.
•2 Only displayed if custom alarm hysteresis is selected – see Section 4.3.2
(not displayed for rate alarms.
•3 The average value is reset automatically on power-up and can also be reset
from a digital input – see Section 4.3.3.
300.3
A3.hP
•1
A1405
rSt-n
•3
•4
34.6
A3 HYS
•2
L130.8
Alarm 3 Trip Point
Alarm type
[In engineering units or % engineering span
per hour]
Alarm 3 Hysteresis
Not applicable to
A3.Fr and A3.Sralarm type.
[Process alarms – engineering units]
Average Value
This is the mean average value of the process
variable input since the average was reset.
To reset the average value, select rSt-Y then press
the
key.
rSt-Y – reset
rSt-n – do not reset
Continued on next page…
8
To Next Page
Loading...
