Mechanical installation
25
3ADW000462R0301 DCS880 Hardware Manual e c
Mounting the converter module H5 inside an enclosure
Cooling air inlet
The cooling fan blows the air out of the front, right and left side of the converter
module. View from:
Right side Front side Left side
Free space around the converter module
In mm:
Cooling air outlet
To avoid circulating air inside the enclosure make sure the exhaust air leaves the enclosure.
Mounting the converter module:
1. Remove the control panel and design cover:
3. Now all mounting holes are accessible:
2. Remove screws (T20) and pull out box (incl. fan):
Detail top:
Detail bottom:
U1 V1 W1
X101
X100
X96
D1C1
X99
To Next Page
Loading...
