EasyManua.ls Logo

ABB Eden DYN - Overview; General description; Safety regulations

ABB Eden DYN
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2TLC172271M0201 Rev D 6
2 Overview
General description
Eden DYN sensor consists of two separate devices Adam and Eva intended for use as
interlocking device for gates, hatches etc. Eva can be general coded or unique coded.
Eden DYN meets the coding requirements according to EN ISO 14119:2013 regarding manipulation
protection.
Eden digital, relationship
Safety regulations
Warning!
Carefully read through this entire manual before using the device.
The devices shall be installed by a trained electrician following applicable safety regulations,
standards and the Machine directive.
Failure to comply with instructions, operation that is not in accordance with the use prescribed in
these instructions, improper installation or handling of the device can affect the safety of people
and the plant.
For installation and prescribed use of the product, the special notes in the instructions must be
carefully observed and the technical standards relevant to the application must be considered.
In case of failure to comply with the instructions or standards, especially when tampering with
and/or modifying the product, any liability is excluded.
Eden
Adam
Eva
DYN
OSSD
General
Unique
Info
Info
Status
Reset
M12 - 5
M12 - 8
M12 - 5
M12 - 8

Related product manuals