EasyManuals Logo

ABB EIB Delta User Manual

ABB EIB Delta
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
EIB Delta-Meter
Electricity Meters
26
ABB i-bus
®
EIB
5 General
5.1 Error codes
Err 100:
Err 101:
Err 102:
Err 103:
Err 104:
Err 105:
Err 107:
Err 108:
Err 109:
Err 111:
Err 112:
Once the installation self-test has been carried out, possible errors are
displayed in ‘Menu mode’ [3 Error] as installation error codes.The displayed
error codes can have different meanings for two-wire, single-phase meters or
three-wire and four-wire, polyphase meters.
Phase voltage L1 is not avalaible
Note: Phase voltage L1 is not connected
Three-wire, polyphase meter: Not used. (The absence of phase voltage L2
is also reported by phase angle error code 119).
Four-wire, polyphase meter: Phase voltage L2 is not available.
Note: Phase voltage L2 is not connected.
Phase voltage L3 is not available.
Note: Phase voltage L3 is not connected.
Two-wire, single-phase meter: Voltage L1 lies above the given maximum
value.
Three-wire, polyphase meter: Voltage between phase L1 and L2 lies above
the given maximum value.
Four-wire, polyphase meter: Phase voltage L1 lies above the given
maximum value.
Note: Meter has the wrong nominal voltage value for this application. Wrong
voltage transformer.
Risk of damage. Disconnect the voltage immediately.
Two-wire, single-phase meter: Voltage L1 lies below the given minimum
value.
Three-wire, polyphase meter: Voltage between phase L1 and L2 lies below
the given minimum value.
Four-wire, polyphase meter: Phase voltage L1 lies below the given
minimum value.
Note: Meter has the wrong nominal voltage value for this application. Wrong
voltage transformer.
Phase current L1 lies above the given maximum value.
Note: Meter has the wrong nominal current for this application. Wrong
current transformer.
Four-wire, polyphase meter: Phase voltage L2 lies above the given
maximum value.
Note: Meter has the wrong nominal voltage value for this application. Wrong
voltage transformer.
Risk of damage. Disconnect the voltage immediately.
Four-wire, polyphase meter: Phase voltage L2 lies below the given
minimum value.
Note: Meter has the wrong nominal voltage value for this application. Wrong
voltage transformer.
Phase current L2 lies above the given maximum value.
Note: Meter has the wrong nominal current value for this application. Wrong
current transformer.
Three-wire, polyphase meter: Voltage between phase L1 and L2 lies above
the given maximum value.
Four-wire, polyphase meter: Phase voltage L3 lies above the given
maximum value.
Note: Meter has the wrong nominal voltage value for this application. Wrong
voltage transformer.
Risk of damage. Disconnect the voltage immediately.
Three-wire, polyphase meter: Voltage between phase L1 and L2 lies below
the given minimum value.
Four-wire, polyphase meter: Phase voltage L3 lies below the given
minimum value.
Note: Meter has the wrong nominal voltage value for this application.
Wrong voltage transformer.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ABB EIB Delta and is the answer not in the manual?

ABB EIB Delta Specifications

General IconGeneral
BrandABB
ModelEIB Delta
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals