PRODUCT FAMILY: FSK II + - OPERATING AND MAINTENANCE MANUAL10 PRODUCT FAMILY: FSK II + - OPERATING AND MAINTENANCE MANUAL 10
1VSR630206EN – en – EDO-D0002852– Instruction manual – 2021.10 Design and specification are subject to change without notice
—
3. Product Description
3.1.7. Manual opening from pole level
To get access to the manual tripping catch, the
threaded plug has to be removed. This can be
removing the plug, the manual tripping crank can
be introduced into the hole in the front cover plate
and the apparatus can be tripped by counter
3.1.8. Electrical pole interlocking (option)
control box, the operation of the pole can be
blocked either in the “open” or “closed” position.
If the lever is in the “service” position, normal
operation is activated. If the lever is in the
“interlocked” position, no “remote” or “local”
Both lever positions can be locked by one or
multiple padlocks.
3.2. Identification
3.2.1. Apparatus
The identification plates are attached visibly to
the pole & control box. The position and language
can vary depending on the customer requirements
Type
designation are internal ABB descriptions and can
vary from one apparatus to another.
3.2.2. MABS Control Card
The identification of the electronic MABS card can
be done by means of the number assigned to it as
3.2.2.1. Codification Type « Barcode »
3.2.2.2. Identification of
Software
identified by a sticker attached
to the CPU and indicating the
checksum and date of the
installed programm.
To Next Page
Loading...
