ABB IN THE RAILWAYS – MEDIUM VOLTAGE PRODUCTS
17
ABB IN THE RAILWAYS – MEDIUM VOLTAGE PRODUCTS
17
1VSR630206EN – en – EDO-D0002852– Instruction manual – 2021.10 Design and specification are subject to change without notice
The used binary inputs can differ from
project to project. Please refer to the valid
wiring diagram.
6.2.5. Binary Signal Outputs
6.2.6. Electrical Characteristics of the Signal
Outputs
The outputs all consists of voltage free contacts
6.2.7. Output relay states
Capacitors discharged / No power supply Apparatus closed and supplied FSK-II S+ open and supplied
(open) — — —(closed)
— — —
— — —
— — —
— — — — — —
— — — — — — — — —
— — —
Table 7 States of output relays
Designation Description Observation
CB Open
This output is a copy of the “OPEN” position as determined
by the sensor
CB Close
alarm
Aux. CB Open
This output is a copy of the “CLOSE” position as determined
by the sensor
Aux. CB Close
This output is a copy of the “CLOSE” position as determined
by the sensor
Unit Ready
WD Ready
Closed when:
not supplied
Open when:
Undervoltage detection
Closed when:
Open when:
Table 5 Signal Outputs
Designation Value
Voltage range
Max. making/breaking capacity
Max. contact resistance
Table 6 Characteristics of the signal outputs
To Next Page
Loading...
