GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
● Setting the dispenser counting sensors
Sensors +P2-105S1 and +P2-105S2 marked in the figure below are active only
for the 4s recipe. Their task is to count dispensers located in the collection zone.
The correct positioning of the sensors is shown below.
Figure 73 Setting the dispenser counting sensors
Figure 74 Setting the dispenser counting sensors
ABB Sp. z o.o.
Side 120/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
