GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
the frame). The fence prevents accidental entry into the robot's work
zone.
Free access to the box exchange/unloading area is prevented by a 2.3
m high mechanical fence. Access to zone 1 is also prevented by a
service door mounted on the security fence.
In order to ensure the entry of service into the robot movement
zone or the box exchange/unloading zone for maintenance purposes
and in the event of a failure, there are five pairs of service doors in the
protective fence - each equipped with a sensor incorporated into the
robot's safety circuit. Opening each pair of doors in automatic mode
causes:immediate stopping of the robot
and box feeder.
4.5 INFORMATION ABOUT THE POSITION AND TRAINING
In order to ensure proper information about the current
condition of the machine and the correct response of the staff to changes
taking place, training will be conducted for employees on the operation of
the station in various modes and procedures.
in unusual and emergency situations. In addition, there are a number of
elements informing the staff about the system status:
- Basic information about the system and its operation can be
obtained on the robot's operator panel.
- In order to immediately turn off the system in the event of an
emergency, there are 7 EMERGENCY STOP buttons at the station
and additional buttons within the station, which, when pressed,
immediately stop the moving elements of the system.
Persons working as Operators should undergo on-the-job training
in operating the station.
ABB Sp. z o.o.
Side 35/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
