GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
Figure 50 Arrangement of guide bands for 4s and 8s
Example:
Figure 51 Examples of leading bands
ATTENTION!
When selecting recipe 4s and resetting the machine, the grinders automatically move
up. Only after setting the 4s recipe on the HMI panel should you start retooling the
guide bands. The bands are being re-equippedimpossible when the grinders are in
the down position (recipe 8s).
ATTENTION!
ABB Sp. z o.o.
Side 94/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
