GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
4.13 TRANSPORT RECOMMENDATIONS
NOTE: Before transporting the devices, make sure that
all mechanical and electrical connections have been
removed.
ATTENTION:Extreme care must be taken when transporting
application assemblies.
ATTENTION:After each transport of the device, it must be
re-levelled.
Transporting the frame
The frame should be moved using the handles located on the upper part of the
structure. The handles intended for carrying the cell are marked in the drawing below.
The frame must be lifted and transported using an overhead crane. Weight of the
frame with the robot ~2 tons.
ABB Sp. z o.o.
Side 97/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
