4 Repair
4.9.2. Repair routines
3HAC022032-001 Revision: E230
© Copyright 2004-2008 ABB. All rights reserved.
xx0600003343
Equipment Article number/QTY Note/Illustration
Elbow fitting 3HAC026511-001/ 1 Pos 6 in figure above
Rubber clamp 3HAC026523-001
T-plug connector 3HAC026515-001/ 2 Pos 3 in figure above
Y-plug connector 3HAC026514-001/ 3 Pos 2 in figure above
Bulkhead plug connector 3HAC026513-001/ 1 Pos 1 in figure above
Air hose 3HAC026526-001 According to table:
Pneumatic house Length
7500 mm
Straight plug connector 3HAC026516-001/ 1 Pos 4 in figure above
Straight fitting 3HAC026507-001/ 4 Pos 5 in figure above
Adapter 3HAC027569-001/ 1 Pos 7 in figure above
Pneumatic
house
Article number
3HAC026526-001
Note
A 140 mm From the Bulkhead plug in the front plate to the T-
plug connector for the SMB box, se step 1 and 2
in Replacement of air hose on page 231
B 270 mm From the T-plug connector to the stright plug
connector in the SMB box.
C 3050 mm From the T-plug connector through the base and
up to the Y-plug connector at the motors of axis
4,5,6, se step 3-5 in Replacement of air hose on
page 231.
D 40 mm From the Y-plug connector at axis 4,5,6 motors to
the straight fitting in the motor cover axis 4,5,6.
E 1750 mm From the Y-plug connector at axis 4,5,6 motors to
the the Y-plug connector at for the motors of axis
3, se step 6 in Replacement of air hose on page
231.
Continued
Continues on next page
To Next Page
Loading...
