Specification of Variants and Options
Product Specification S4Cplus M2000/BaseWare OS 4.0 33
OPERATOR’S PANEL
The operator’s panel and teach pendant holder can be installed in different ways.
181 Standard, i.e. on the front of the cabinet.
182 External, i.e. in a separate operator’s unit. (See Figure 15 for required preparation)
All necessary cabling, including flange, connectors, sealing strips, screws, etc., is
supplied.
External enclosure is not supplied.
183 External, mounted in a box. (See Figure 16)
Figure 15 Required preparation of external panel enclosure (all dimensions in mm).
184
224
180
140
193
196
70
62
45
o
External panel enclosure
(not supplied)
M8 (x4)
Connection to
Holes for
flange
Holes for
operator’s panel
Holes for
teach pendant holder
the controller
90
155
5 (x2)
Teach pendant
connection
200
240
Required depth 200 mm
M4 (x4)
96
223
To Next Page
Loading...
