[625] SpotWare Servo
46 Product Specification RobotWare Options for BaseWare OS 4.0
[625] SpotWare Servo
The Spotweld options are general and flexible software platforms for creation of
customized and easy to use function packages for different types of spotweld systems
and process equipments.
The SpotWare Servo option is used for sequential welding with one or two servo gun
equipments. If also welding with two servo guns at the same time is desired then the
SpotWare Servo Plus option has to be used instead.
The SpotWareServo option provides dedicated spotweld instructions for fast and
accurate positioning combined with gun manipulation, process start and supervision of
the different gun equipments.
Communication with the welding equipment is carried out by means of digital inputs
and outputs.
It should be noted that the SpotWare options are general and can be extensively
customized. They have a default “ready to use” functionality directly after install but it
is intended that some configuration data, RAPID data and RAPID routines has to be
changed during the customizing.
SpotWare Servo features
The SpotWare Servo package contains the following features:
- Fast and accurate positioning using the unique QuickMove and TrueMove
concept.
- Gun pre-closing, i.e having the gun closing synchronized with weld position.
- Gun equalizing, i.e. having the gun “floating” around the weld position.
- Constant tip force during welding.
- Manual actions for welding and gun control.
- Several simulation possibilities for test purposes.
- Reverse execution with gun control.
- Weld error recovery with automatic rewelding.
- User-defined supervision and error recovery.
- User-defined autonomous supervision, such as weld current signal and water
cooling start.
- Wide customizing possibilities.
- Default “ready to use” functionality directly after install.
- Detecting of missing or improper plates.
- Gun calibration functions.
- Spot counters and tip wear data for each used gun.
To Next Page
Loading...
