2 Reference information
2.1.3 Weight specifications
3HAC 16245-1 A 21
2.1.3 Weight specifications
Definition In all repair and maintenance instructions, weights of the components handled are sometimes
specified. All components exceeding 22 kg (50 lbs) are high-lighted in this way.
ABB recommends the use of lifting equipment when handling components with a weight
exceeding 22 kg to avoid inflicting injury. A wide range of lifting tools and devices is avail-
able for each manipulator model.
Example Below is an example of how a weight specification is presented:
The motor weighs 65 kg! All lifting equipment used must be dimensioned accordingly!
To Next Page
Loading...
